twist pen
All twist pens use Cross ink refills. To replace the ink, gently pull apart the wood pieces, unscrew and remove the empty ink port, screw in the new ink port, then gently press back together the two wood pieces.
pencil
All pencils use 0.7mm lead. To replace the lead, gently pop off the cap at the top of the pencil to show the eraser, then gently pop the eraser out of its holder. Fill the pencil with the amount of lead needed then simply replace the eraser and cap.
click pen
All click pens use Parker ink refills. To replace the ink, unscrew the pen tip, pull out the empty ink well, replace with a new ink well, then screw the pen tip back on.
fountain pen
All fountain pens use standard international size fountain pen replacement cartridges, available for purchase both in stores and online, as well as the option to use a refillable fountain pen reservoir. To replace the ink, unscrew the pen nib, pop off the empty ink cartridge, gently pop on either a new ink cartridge or the refillable reservoir, then screw the pen tip back on.
seam ripper
The blade is store in the handle for your safety and to protect the blade from accidental damage. To use the seam ripper, firmly grip the extended piece of hardware and gently pull the blade from the handle. Place the hardware end firmly within the handle, and your seam ripper is ready for any future projects. To store the blade, simply remove the blade from the handle and place the blade firmly within the tube.
coffee scoop
To ensure the life of your scoop, do not submerge or soak your handle in water. If necessary, you can remove the scoop from the handle by unscrewing the end, then unscrewing the scoop from the handle. Hand wash with warm water and gentle soap if needed. Be sure to dry all parts completely before reassembling.